4 Zone Color Temperature Remote Control

Model # RT7

  • Apply to dual color(warm white + cool white) LED controller.
  • Ultra sensitive color adjustment touch wheel.
  • Each remote can match one or more receiver.
  • AAAx2 battery powered.
  • Operate with LED indicator light.

Back Holder:

Two options are offered for selection, please fix the back holder on the wall with two screws, or adhere the back holder to the wall with paster.

  1. Back holder without magnet

2. Back holder with magnet

Model No.RT7
Output Signal RF(2.4GHz)
Working Voltage3VDC(AAAx2)
Working Current<5mA
Standby Current <10μA
Standby Time 1 year
Remote Distance30m(Barrier-free Space)
EMC Standard (EMC)ETSI EN 301 489-1 V2.2.3 / ETSI EN 301 489-17 V3.2.4
Safety Standard (LVD)EN 62368-1:2020+A11:2020
Radio Equipment (RED) ETSI EN 300 328 V2.2.2
Certification CE, EMC, LVD, RED
Operation TemperatureTa: -30°C ~ +55°C
Size L140 X W60 X H26mm
Gross Weight 0.088kg
Warranty 5 years

Key Function:

Operating Manual:

  • 1. When turn on light, the indicator display blue. When turn off light, the indicator display red.
  • 2. When touch the color wheel, the indicator will display the same color.
  • 3. When press or touch operation is invalid (If the light is off), the indicator display red.
  • 4. To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.

Safety Information:

  • 1. Read all instructions carefully before you begin this installation.
  • 2. When installing battery, pay attention to the battery positive and negative polarity.
    A long time without the remote control, remote the battery.
    When remote distance becomes smaller and insensitive replace the battery.
  • 3. If no response from the receiver, please re-match the remote.
  • 4. Gently handle remote, beware of falling.
  • 4. For indoor and dry location use only.

Match Remote Control:

End user can choose the suitable match/delete ways. Two options are offered for selection:

  1. Use the Controller’s Match key
  • Match:
    Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
    The LED indicator fast flash a few times means match is succesful.
  • Delete:
    Press and hold match key for 5s to delete all match,
    The LED indicator fast flash a few times means all matched remotes were deleted.

2. Use Power Restart

  • Match:
    Switch off the power, then switch on power, repeat again.
    Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
    The light blinks 3 times means match is successful.
  • Delete:
    Switch off the power, then switch on power, repeat again.
    Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
    The light blinks 5 times means all matched remotes were deleted.
.